NIOP Compatible Products
This page has been superseded by the NIOP Product Catalog.
Please use it for updated product listings or visit the Homepage on the NIOP Guide.
Adaptive Equipment
Bed Leveling Tool for Anet A8/Prusa-style 3D Printers
Violin/Cello Bow Adapter
Orthoses
Prostheses
Hands/Terminal Devices
XO-Glove Hintha Hand NIOP Remix with Q-C (Phase 2)
Kwawu Bionic with Q-C*
Moto-Gripper NIOP Remix with Q-C*
NIOP Hook with Q-C
NIOP Q-C Adapter for YouBionic HandyLite
Prayer Hand (Phase 2)
Wrists
Standard 1/2"-20 Bolt for Traditional Prosthetic Terminal Devices
Forearms
Kwawu Socket NIOP Remix for Std 1/2"-20 Bolt
Kwawu Thermoform NIOP Remix
Kwawu Thermoform NIOP Remix for Std 1/2"-20 Bolt
Elbows
Upper Arm
Brace Plate & shoulder harness (for anchoring the drive-line on shoulder-driven devices)
Conductor (Humeral for XO-Shoulder)
Helix Cuff Remix by Zitouni (cuff is split in two pieces for smaller print beds)
Scapula Plate (experimental device for anchoring the drive-line on shoulder-driven devices)
Zelix Cuff by dzimmerm (Helix cuff hybrid that's interchangable with Kwawu cuff)
Notes:
- * Indicates device is part of Phase 1 (proposal on Loomio), scheduled to be delivered by October 2019. See Project Schedule below.
- Phase 2 begins after all Phase 1 design work has been completed, scheduled for November 2019. A re-assessment of the projects will be done before this phase starts, which will very likely be centered around community feedback and requests to set the priorities for Phase 2. See Project Schedule below.
- For device sizing and recommended materials:
- NIOP Sizing Guide.xls (temporary - to be replaced with an OpenSCAD system similar to the Kwawu)
- NIOP Bill of Materials (with links for hardware & materials req'd)