---  To learn about what each of the above icons represents, please refer to the [Device Ratings Guide](https://hub.e-nable.org/s/e-nable-devices/wiki/page/view?title=Device+Ratings+Guide "Device Ratings Guide"). ---  **Designer:** Nate Munro **Description:** The Kickstand nail clipper brace uses a standard Revlon toenail clipper and is very useful for anyone who is missing a hand, has arthritis, or difficulty holding things. It works well when set on your leg or a table. Also the nail file can be slid through the slot in the back of the brace so it can be used as a handle. If you find it still slips, you can cover the nail clipper handle with heat shrink insulation for wiring. You can also add rubber feet to the bottom so it doesn't slip, but it's worked fine for me and everyone I've given it to without those extra steps. Revlon toenail clippers [https://smile.amazon.com/gp/product/B0015HKN3G/ref=ox_sc_act_title_1?smid=ATVPDKIKX0DER&psc=1](https://smile.amazon.com/gp/product/B0015HKN3G/ref=ox_sc_act_title_1?smid=ATVPDKIKX0DER&psc=1) If you want to support e-NABLE with your purchase, use Amazon Smile and donate to Enable Rochester Limited. Thank you! [http://enablingthefuture.org](http://enablingthefuture.org) --- # Files and Resources **STL Files:** [https://www.thingiverse.com/thing:3722898](https://www.thingiverse.com/thing:3722898 "https://www.thingiverse.com/thing:3722898") **Source CAD Files:** Coming soon **Instructions:**[https://www.thingiverse.com/thing:3722898](https://www.thingiverse.com/thing:3722898) **Assembly Materials Kit:** Coming soon **Video Tutorials:** Coming soon **Feedback: [https://forms.gle/Z7f41G4tYEE5u1s57](https://forms.gle/Z7f41G4tYEE5u1s57)\ [](https://forms.gle/Z7f41G4tYEE5u1s57)**