Fusion Hand - awaiting confirmations and modifications
\

---
To learn about what each of the above icons represents, please refer to the [Device Ratings Guide](wiki:/s/e-nable-devices/wiki/Device+Ratings+Guide "Device Ratings Guide").
---

**Designer:** Dean Rock
---
**Description:**
This is a filled palm device. To use this device, the user must not have a wrist. It can be actuated with a single tendon, either with an elbow powered cuff or a bionic design. It is designed with TPU in mind.
This device is intended to be used in pair with a cuff from another design!
For more information, see the [Which Design?](wiki:/s/e-nable-devices/wiki/Which+Design%3F "Which Design?") page.
---
**Maker’s summary:**
This a new prosthetic hand design that incorporates a push/pull actuation system for five fingers to a single tendon for incorporating with elbow, motorized and/or wrist activation. It also differs from previous designs by using TPU, specifically Kodak Flex 98, for its structure. It is remarkably strong, durable, impact resistant and prints well with most consumer level printers. There are videos for overview, assembly and construction techniques as well as files for one entire, adult-size right hand.
**Maker’s notes:**
The files can be printed in the orientation they are downloaded without supports but may need brim for bed adhesion on some pieces. The Tilt Slide may work better when printed from a hard plastic such as PLA or PETG though the Flex 98 (100% infill) works fine for me.
---
<other instructions or tips about the main challenges or particularities of the design>

WARNING: the inside of the palm in the current version is empty, so it needs to be filled with a different material?
WARNING: incomplete design and not enough resources?
---
**STL Files:** [Link](https://www.thingiverse.com/thing:4829371)
**Source CAD Files:** not available
**Instructions:**
**Assembly Materials:**
**Video Tutorials:**